What is a prefab home configurator and what does a manufacturer need to build one?
A prefab home configurator is a web tool where the buyer combines model, modules, layout, façade and finishes, sees the house in 3D and gets an indicative price. The manufacturer receives a complete, buildable configuration instead of an email asking what one model costs.
What a prefab home configurator is, and what it is not
It is a web tool where the buyer of an industrialised house combines model, modules, layout, façade and finishes, sees the result in 3D and gets an indicative price. The manufacturer receives a complete configuration. It is not a filtered catalogue and it is not a tour of the show home.
A filtered catalogue lets people choose between what has already been photographed. A tour lets them look at one specific house. A configurator does both and a third thing: it knows which combinations are valid and what each one costs. That part turns the website into a sales tool.
For the buyer the difference is simple: they see their house, not the neighbour's. For the factory it means the request arrives with model, modules, layout, façade and finishes, instead of arriving as "how much is model X?" and a twenty-minute call to rebuild it.
What it is not: a project, a building licence or a fixed quote. A configurator does not decide whether the plot has access, whether the ground can take the foundations or whether the council allows that roof. That is your technical team's work, with the project in front of them.
What gets configured in a prefab home
You configure what the factory can actually produce: base model, modules and extensions, layout, façade and roof, windows, interior finishes and equipment. Every option must be on the technical office's real list, with its price and its effect on lead time. What does not exist is not offered.
The table is a typical list, not a recipe. Every factory has its own matrix and its own way of naming it. What matters is that the configurator uses the technical office names: if the website says "timber façade" and the production sheet says something else, the configuration cannot be built.
Equipment deserves its own note because it often stays out of the 3D. Aerothermal heating or solar panels do not change the geometry of the house, but they do change the price and the services. They can be configured as a line on the spec sheet.
| Option | Examples | Affects price | Affects the factory |
|---|---|---|---|
| Base model | Two or three bedrooms, with or without porch | Yes | Yes |
| Modules and extensions | Extra module, extra bedroom, terrace | Yes | Yes |
| Layout | Open living room or closed kitchen, wardrobes | Depends | Yes |
| Façade and roof | Timber, prefab panel, flat or pitched roof | Yes | Yes |
| Windows and doors | Windows, doors, blinds, profile colour | Yes | Depends |
| Interior finishes | Floor, walls, paint, internal doors | Depends | Depends |
| Equipment (aerothermal, solar) | Heating, hot water, solar panels | Yes | Depends |
The rules are the product
A configurator is only as good as its rules. It should allow only buildable combinations, respect structural and module transport limits, and flag lead times. The rules come from the factory, not from a template, and they are what separates a configurator from a pretty viewer.
The most obvious rule is incompatibility: a module that will not join another, a roof that will not take a porch, a window that will not fit a wall. The second is the physical limit: a module has a maximum size that can travel by road, and that shapes what you can offer, not just how it looks.
The third is time. Two configurations at the same price can leave the factory weeks apart depending on finish or equipment. If the configurator does not say so, a sales agent says it on the phone and the original problem comes back.
What the configurator does not do is validate building regulations. It does not check local building codes and it does not replace the architect's project or the licence. It can hold the buyer's preferences and your catalogue constraints; the legality of the house on its plot is a different job.
Indicative price and final quote
The configurator gives an indicative price calculated with your rules; the final quote comes after the plot and the project. It covers what your factory controls (modules, finishes, equipment) and excludes what it does not: land, foundations, licences, transport and connections.
That split has to be written inside the tool, before the buyer asks for a quote. An honest breakdown prevents two things: someone believing the website price is what they will pay, and your team explaining why the figure grew once the site study arrived.
The phrase "turnkey" is used widely and means different things in different companies. A configurator should not use it as a promise. If your catalogue includes foundations, transport and assembly, say so in those words and with those conditions. If it does not, the tool should be just as clear.
The price can be a figure, a range or a "from". A badly built range confuses more than a single figure; a "from" with no conditions looks like an offer. What works is calculating with real rules and stating that the result is indicative.
What a manufacturer needs to build one
Five things: geometry for each model and module, an option list with prices, incompatibility and limit rules, real finish samples, and a destination for requests. Without those five, the project stops at the first demo and never reaches a buyer. The hard part is usually the rules, not the 3D.
The most undervalued point is the last one. A configurator is not finished the day it ships: prices change and models retire. If nobody owns the price table, in six months the tool will be saying things the factory no longer does.
Geometry is the other critical point. A render model and a configurator model are not the same object: the render model may carry millions of polygons and merged parts; the configurator model needs separate parts and a weight that survives the web and a phone.
- 3D, BIM, CAD models or drawings for each model and module, at real dimensions.
- Option list and price table: what each option adds and under which conditions.
- Incompatibility rules, structural limits and module transport limits.
- Reliable samples or photos of each finish, with its commercial name and reference.
- Where requests go: CRM, inbox or ERP, and who handles them.
- Who maintains the prices, and how often they are reviewed.
Technology: images, WebGL or pixel streaming
For a house there are three routes. Pre-rendered images give maximum quality on a light page. Real-time WebGL lets people rotate and combine in the browser, phones included. Pixel streaming gives render quality with one cloud GPU per user, useful on screens and at trade fairs.
Most house catalogues start with pre-rendered images and move to WebGL when buyers want to change the façade or the layout without waiting. Both can coexist: images for the spec sheet, real time for the configurator.
Pixel streaming is the most expensive route to run because every user needs a machine in the cloud. It makes sense when the scene is very heavy or when the configurator is shown on a large screen at a fair or in a sales cabin, and less so for someone browsing from a phone at home.
In housing, the interior visit matters more than in a piece of furniture. Buyers want to walk the living room, look at the kitchen from the island and see whether the hallway is narrow. That takes camera and lighting work that a generic viewer does not solve.
The virtual visit to the show home
The virtual visit shows the real house. The catalogue model is walkable in 3D from the browser; the show home or a delivered house is captured with gaussian splatting and opens on a phone. It complements the configurator: one shows the house that exists, the other the one the buyer can order.
Splatting looks photoreal because it starts from real photos and video. It runs in any browser and on a phone with nothing installed, and it keeps the light and materials of the capture day. It is the quickest way to show the show home to someone six hundred kilometres away.
Its limits are those of the technique: reflections, glass and thin objects lose detail, and it can be neither measured nor changed. It does not replace a drawing or a render of a variant that does not exist yet. If buyers want to see their own layout, that is the configurator.
The combination that works: configurator to decide, splatting to believe. First the buyer assembles their house, then they walk the show home and understand how that living room feels. The request arrives with the visit done.
Custom build or a subscription platform?
A subscription platform handles simple catalogues with little upfront investment. A custom build pays off with many modules, your own rules, configuration-based pricing, CRM or ERP integration and the need to own the code. The dividing line is the rules.
In a prefab house the rules weigh more than in almost any other product. A furniture catalogue can live with independent options; a house cannot, because modules condition each other and transport limits the offer. Once the logic leaves the template, the platform starts asking for exceptions.
The other factor is ownership. With a custom build the code and the models belong to the manufacturer and there is no monthly platform fee. That matters when the configurator becomes part of the sales process.
Frequently asked questions
How much does a prefab home configurator cost?
It depends on the number of models and modules, the rules, the quality of the geometry and the integrations. There is no rate card because no two catalogues look alike. After a 30-minute call we send a proposal with fixed scope and price.
Does the configurator replace the architect's project?
No. The configurator holds the commercial configuration and the indicative price. The project, structural calculations, licence and site study remain the technician's work and are not solved on the website.
Can I start with a single model?
Yes, and it is usually the sensible route. One model with its modules and finishes lets you test the configurator with real buyers, tune rules and prices, and then decide whether to extend it to the rest of the catalogue.
How are prices kept up to date?
With a table the manufacturer controls, or through an ERP integration. What matters is one source and one person responsible for it. If prices live in three places, the website will end up saying something else.
Does it work if I sell to developers as well as private buyers?
Yes. The same catalogue can open as a B2B showroom with spec sheets and downloads for developers, distributors and buyers of modular units, with access and quote requests kept separate from the private channel.
