Guide · Virtual showroom

What is a B2B virtual showroom?

A B2B virtual showroom is a manufacturer’s collection built in 3D and opened in a browser. Distributors, retailers, architects and sales reps walk through products in context, check finishes and spec sheets, download models and request a quote. It is not a scan or a tour of a physical store.

Mori Maison team · Reading 7 min · Updated: November 2026

What it is and how it differs from a tour

A B2B virtual showroom is built from product 3D models, not from a recording of a space. That lets you show the collection in interiors that do not exist yet, change finishes without reshooting and add references without moving anyone.

The confusion is common because both open in a browser and both are explored with a mouse. A 360 tour records what is already installed: a store, a show apartment, a stand. A 3D showroom starts from the catalogue and builds the context around it: a living room, a hotel, an office, a terrace.

That difference changes what you can do later. In a tour, moving a sofa means shooting again. In a showroom, the sofa is a model with materials and goes where it fits. When the manufacturer changes a fabric, the material changes, not the photograph.

What a real B2B showroom includes

A B2B showroom is not only a handsome scene: it carries spec sheets, finishes, dimensions, model downloads and a route to a quote. The commercial part is what separates it from a demo. Without a sheet or a request, the visitor looks and leaves no trace.

Order matters. A showroom that starts with the scene and ends in a PDF sheet wastes the advantage of having the data in 3D. If the sheet comes from the same model, dimensions and materials do not contradict what is on screen; copied by hand, they eventually will.

  • Scenes in context: contract, hospitality, office, residential or retail, per channel.
  • Products with swappable materials and stable finish names.
  • Spec sheets with dimensions, materials, weights and care.
  • Model download in glTF, USD or FBX and, where relevant, a BIM file.
  • Distributor login with channel pricing and availability.
  • Quote requests that arrive with the reference and finish already chosen.

Showroom, 360 tour or PDF catalogue

A PDF informs, a tour proves a space exists and a 3D showroom lets you change context, finishes and references without recapturing. The choice depends on whether you have the space installed or only the product, and on how much the visitor needs to interact.

They can coexist: the tour of a flagship store and the showroom of the full collection. One shows where to buy; the other shows what can be bought.

Three ways to show a collection to the sales network
Criterion3D showroom360 tourPDF catalogue
SourceProduct 3D modelsScan of a real spaceStyled photography
Change finishesYes, per materialNot without recapturingNo
Product without prototypeYesNoOnly with a prior render
Sheet and downloadYes, from the same modelNoSheet in PDF
Access per channelLogin and own pricingNoList by email
Weight and performanceTarget 60 fps on mobile and under 5 MB per productDepends on viewer and photosLight, but flat

Who it makes sense for

It makes sense if you sell through third parties and need everyone to tell the same story: distribution, multi-brand retail, architecture and interior design practices and your own sales force. Also if the product sells in context and a PDF no longer explains it.

The opposite case exists: a manufacturer with twelve references selling on direct visits and no distributor network does not need a showroom. It needs good sheets and renders.

  • Every distributor shows the catalogue their own way, with their own material.
  • You sell contract, hospitality or office and the client needs to see the piece in context.
  • Finishes change per channel and the PDF is outdated the day it leaves the factory.
  • Specifiers ask for dimensions, materials and models for their project.
  • You want to launch a collection before prototypes or final photography exist.
  • The trade-fair stand lasts two weeks and nobody sees it for the rest of the year.
  • Sales reps travel with a laptop and screenshots.

Launching the collection before it is manufactured

Because the showroom is built from CAD or renders, the collection can be presented before a physical prototype exists. That brings pre-sales and specifier interest forward and helps decide which references to produce. It does not replace a physical sample when the client needs to touch the material.

Furniture manufacturers usually close the catalogue months in advance. If the site only shows what has already been photographed, the distributor works with last season while the new one waits for the shoot. With a showroom, the new collection is shown as soon as the model is approved, with its finishes and dimensions.

Be explicit about what is a render and what is a real sample. A showroom should not promise a touch that an image cannot give. That is what physical samples and visits are for.

Channel access: login, pricing and traceability

A B2B showroom usually has two layers: a public one for specifiers and a closed one for distributors. The login allows channel pricing, stock, launches before release date and a record of what each account looks at. That traceability is what a PDF never gives you.

The public layer lets an architect find the product, see dimensions and download the model. The private layer lets a distributor check their pricing and know what they can offer.

Traceability needs care and consent. Knowing that an account viewed a reference helps a rep call at the right time; watching people without saying so is something else. The project defines what is stored and why.

Performance: what makes it used or abandoned

A showroom that takes seconds to open does not get used, however well modelled it is. Our target is 60 fps on a mid-range phone and under 5 MB per product. That forces geometry, textures and scene loading to be optimised.

The usual strategy is to load the space first and then the products the visitor is about to see, not the whole collection. A fallback image while the 3D arrives and a clear message when the device cannot move it are worth having.

Weight is not fixed at the end. It is decided when modelling: how many polygons a chair has, how many textures finishes share, whether plants are geometry or texture.

How it is built, in four steps

The work runs in stages: scope and script, geometry, scene and access. We do not give a standard duration because it depends on the references and on how many models have to be built. Timing is fixed in the proposal, after seeing the source material.

  • Scope: which references are in, which channels and what the visitor must be able to do.
  • Geometry: optimise models from CAD or render and name materials and finishes properly.
  • Scene: build the contexts, place product, light it and test on a phone.
  • Access: publish with login if needed, connect the quote request and document it.

How to know it works

Measure what the showroom changes in the process, not just visits. Useful signals: references viewed per account, model downloads, quote requests that arrive with a finish chosen and time to the first sales reply. High traffic with no requests says nothing.

We do not promise conversion percentages: they depend on the product, the channel and the sales force. What can be checked is whether the showroom removes steps. If the rep stops emailing PDFs and the specifier finds dimensions alone, it is working.

  • Quote requests that arrive with reference and finish, not “send me information”.
  • Model downloads by specifiers.
  • References viewed by each distributor before a fair or a launch.
  • Time between the enquiry and the rep’s reply.

Frequently asked questions

Is a virtual showroom the same as a 360 tour?

No. A tour records a space that exists; a showroom is built from product 3D models. That allows finishes, contexts and references to change without recapturing, and lets you show product that has no prototype yet.

Do I need every product in 3D?

You do not have to start with the full catalogue. Launch with one family or collection and expand later. What matters is that models are optimised and materials have stable names so work is not repeated.

Can it be closed to distributors only?

Yes. The showroom can have a public area for specifiers and a login area for the sales network, with channel pricing and pre-release launches. That is decided in scope, not added at the end.

Can it launch a collection before it is manufactured?

Yes, if there are approved 3D models. The collection can be presented, finishes shown and requests collected before prototypes exist. It does not replace a physical sample when the client needs to touch the material.

Does it work on mobile?

Yes. The target is 60 fps on a mid-range phone and under 5 MB per product. It is tested on a real phone, not only on a laptop.

Does it integrate with my ERP or my website?

Yes. The showroom can live on your domain and send the quote request to your CRM or by email. Model downloads and sheets are generated from the same catalogue. Integration is defined in scope.

What does it cost and how long does it take?

It depends on the number of references, the state of the models and whether the space has to be built or an existing one is reused. There is no single rate: scope and timing are fixed in each proposal.

Related service

The collection open all year, not only at the fair

We build the showroom from your 3D models, with sheets, finishes, downloads and quote requests. No monthly fee, and the code and models stay with you.